#
# GENERIC -- Generic kernel configuration file for FreeBSD/i386
#	Mikäli et ole aivan varma voitko ottaa rivin pois
#	   dmesg komennolla voit etsiä laitetta
#		jota olet karsimassa pois!
#
#	 # kohdan edessä tarkoittaa kommentti riviä
#


machine		i386			#Laitteisto i386 Älä Muuta
#cpu		I386_CPU		#386 Prosessorit
#cpu		I486_CPU		#486 Prosessorit
#cpu		I586_CPU		#Pentium 1 Prosessorit
cpu		I686_CPU		#P1> Prosessorit
ident		athlon			#Kernelin nimi
maxusers	0			#Käyttäjiä enemillään 0 pois käytöstä

#makeoptions	DEBUG=-g		#Build kernel with gdb(1) debug symbols

options 	MATH_EMULATE		#Tuki x87 emulaatiolle
options 	INET			#InterNETworking
options 	INET6			#IPv6 communications protocols
options 	FFS			#Berkeley Fast Filesystem
options 	FFS_ROOT		#FFS usable as root device [keep this!]
options 	SOFTUPDATES		#Enable FFS soft updates support
options 	UFS_DIRHASH		#Improve performance on big directories
options 	MFS			#Memory Filesystem
options 	MD_ROOT			#MD is a potential root device
options 	NFS			#Network Filesystem
options 	NFS_ROOT		#NFS usable as root device, NFS required
options 	MSDOSFS			#MSDOS Filesystem
options 	CD9660			#ISO 9660 Filesystem
options 	CD9660_ROOT		#CD-ROM usable as root, CD9660 required
options 	PROCFS			#Process filesystem
options 	COMPAT_43		#Compatible with BSD 4.3 [KEEP THIS!]
options 	SCSI_DELAY=15000	#Delay (in ms) before probing SCSI
options 	UCONSOLE		#Salli käyttäjien siepata konsoli
options 	USERCONFIG		#boot -c editori
options 	VISUAL_USERCONFIG	#visuaalinen boot -c editori
options 	KTRACE			#ktrace(1) tuki
options 	SYSVSHM			#SYSV-tyylinen jaettu muisti
options 	SYSVMSG			#SYSV-tyyliset viesti jonot
options 	SYSVSEM			#SYSV-tyyliset semaphores
options 	P1003_1B		#Posix P1003_1B reali-kellon laajennus
options 	_KPOSIX_PRIORITY_SCHEDULING
options 	ICMP_BANDLIM		# Rajoita pahoja icmp vastauksia

#parille scsi laitteelle modia ahc ja ahd

#options 	AHC_REG_PRETTY_PRINT	# Tulosta rekisterin "bittikentät" virheen korjauksena
					# Ulostulo. Lisää ~128k ajurille.
#options 	AHD_REG_PRETTY_PRINT	# Tulosta rekisterin "bittikentät" virheen korjauksena
					# Ulostulo. Lisää ~256k ajurille.

# To make an SMP kernel, the next two are needed
#options 	SMP			# Symmetric MultiProcessor Kernel
#options 	APIC_IO			# Symmetric (APIC) I/O

# To support HyperThreading, HTT is needed in addition to SMP and APIC_IO
#options 	HTT			# HyperThreading Technology 

device		isa			#Isa väyläntuki (tarvittava) npx
#device		eisa			#Eisa väyläntuki
device		pci			#pci väyläntuki

# Floppy drives
#device		fdc0	at isa? port IO_FD1 irq 6 drq 2 
#device		fd0	at fdc0 drive 0
#device		fd1	at fdc0 drive 1
#
# If you have a Toshiba Libretto with its Y-E Data PCMCIA floppy,
# don't use the above line for fdc0 but the following one:
#device		fdc0

# ATA ja ATAPI laitteet 
#device		ata0	at isa? port IO_WD1 irq 14
#device		ata1	at isa? port IO_WD2 irq 15
device		ata
device		atadisk			# ATA disk drives
device		atapicd			# ATAPI CDROM drives
#device		atapifd			# ATAPI floppy drives
#device		atapist			# ATAPI tape drives
options 	ATA_STATIC_ID		#Static device numbering

# SCSI Ohjaimet
#device		ahb			# EISA AHA1742 sarjan ohjaimet
#device		ahc			# AHA2940 ja AIC7xxx levyohjain laitteet
#device		ahd			# AHA39320/29320 and onboard AIC79xx laitteet
#device		amd			# AMD 53C974 (Tekram DC-390(T))
#device		isp			# Qlogic perhesarja
#device		mpt			# LSI-Logic MPT/Fusion
#device		ncr			# NCR/Symbios Logic
#device		sym			# NCR/Symbios Logic (uudemmat piirisarjat)
#options 	SYM_SETUP_LP_PROBE_MAP=0x40
					# Allow ncr to attach legacy NCR devices when 
					# both sym and ncr are configured

#device		adv0	at isa?
#device		adw
#device		bt0	at isa?
#device		aha0	at isa?
#device		aic0	at isa?

#device		ncv			# NCR 53C500
#device		nsp			# Workbit Ninja SCSI-3
#device		stg			# TMC 18C30/18C50

# SCSI laitteet
device		scbus			# SCSI väylä
device		da			# Direct Access (Levyille)
device		sa			# Sequential Access (Nauha asemat etc)
device		cd			# CD
device		pass			# Passthrough device (direct SCSI access)
device		atapicam		# atapicam

# RAID controllers interfaced to the SCSI subsystem
#device		asr			# DPT SmartRAID V, VI and Adaptec SCSI RAID
#device		dpt			# DPT Smartcache - See LINT for options!
#device		iir			# Intel Integrated RAID
#device		mly			# Mylex AcceleRAID/eXtremeRAID
#device		ciss			# Compaq SmartRAID 5* series

# RAID controllers
#device		aac			# Adaptec FSA RAID, Dell PERC2/PERC3
#device		aacp			# SCSI passthrough for aac (requires CAM)
#device		ida			# Compaq Smart RAID
#device		amr			# AMI MegaRAID
#device		mlx			# Mylex DAC960 family
#device		twe			# 3ware Escalade

# PS/2 näppäimistön ohjain ja tuki näppämistölle ja ps/2 hiiri
device		atkbdc0	at isa? port IO_KBD
device		atkbd0	at atkbdc? irq 1 flags 0x1
device		psm0	at atkbdc? irq 12

device		vga0	at isa?

# splash screen/screen saver
pseudo-device	splash

# syscons is the default console driver, resembling an SCO console
device		sc0	at isa? flags 0x100

# Enable this and PCVT_FREEBSD for pcvt vt220 compatible console driver
#device		vt0	at isa?
#options 	XSERVER			# support for X server on a vt console
#options 	FAT_CURSOR		# start with block cursor
# If you have a ThinkPAD, uncomment this along with the rest of the PCVT lines
#options 	PCVT_SCANSET=2		# IBM keyboards are non-std

device		agp			# support several AGP chipsets

# Floating point support - do not disable.
device		npx0	at nexus? port IO_NPX irq 13

# Power management support (see LINT for more options)
#device		apm0	at nexus? disable flags 0x20 # Advanced Power Management

# PCCARD (PCMCIA) support
#device		card
#device		pcic0	at isa? irq 0 port 0x3e0 iomem 0xd0000
#device		pcic1	at isa? irq 0 port 0x3e2 iomem 0xd4000 disable

# Serial (COM) ports
#device		sio0	at isa? port IO_COM1 flags 0x10 irq 4
#device		sio1	at isa? port IO_COM2 irq 3
#device		sio2	at isa? disable port IO_COM3 irq 5
#device		sio3	at isa? disable port IO_COM4 irq 9

# Parallel port
#device		ppc0	at isa? irq 7
#device		ppbus			# Parallel port bus (required)
#device		lpt			# Printer
#device		plip			# TCP/IP over parallel
#device		ppi			# Parallel port interface device
#device		vpo			# Requires scbus and da


# PCI Ethernet NICs.
#device		de			# DEC/Intel DC21x4x (``Tulip'')
#device		em			# Intel PRO/1000 adapter Gigabit Ethernet Card (``Wiseman'')
#device		txp			# 3Com 3cR990 (``Typhoon'')
#device		vx			# 3Com 3c590, 3c595 (``Vortex'')

# PCI Ethernet NICs that use the common MII bus controller code.
# NOTE: Be sure to keep the 'device miibus' line in order to use these NICs!
device		miibus			# MII bus support
#device		dc			# DEC/Intel 21143 and various workalikes
#device		fxp			# Intel EtherExpress PRO/100B (82557, 82558)
#device		pcn			# AMD Am79C97x PCI 10/100 NICs
#device		rl			# RealTek 8129/8139
#device		sf			# Adaptec AIC-6915 (``Starfire'')
#device		sis			# Silicon Integrated Systems SiS 900/SiS 7016
#device		ste			# Sundance ST201 (D-Link DFE-550TX)
#device		tl			# Texas Instruments ThunderLAN
#device		tx			# SMC EtherPower II (83c170 ``EPIC'')
device		vr			# VIA Rhine, Rhine II
#device		wb			# Winbond W89C840F
#device		xl			# 3Com 3c90x (``Boomerang'', ``Cyclone'')
#device		bge			# Broadcom BCM570x (``Tigon III'')

# ISA Ethernet NICs.
# 'device ed' requires 'device miibus'
#device		ed0	at isa? disable port 0x280 irq 10 iomem 0xd8000
#device		ex
#device		ep
#device		fe0	at isa? disable port 0x300
# Xircom Ethernet
#device		xe
# PRISM I IEEE 802.11b wireless NIC.
#device		awi
# WaveLAN/IEEE 802.11 wireless NICs. Note: the WaveLAN/IEEE really
# exists only as a PCMCIA device, so there is no ISA attachment needed
# and resources will always be dynamically assigned by the pccard code.
#device		wi
# Aironet 4500/4800 802.11 wireless NICs. Note: the declaration below will
# work for PCMCIA and PCI cards, as well as ISA cards set to ISA PnP
# mode (the factory default). If you set the switches on your ISA
# card for a manually chosen I/O address and IRQ, you must specify
# those parameters here.
#device		an
# The probe order of these is presently determined by i386/isa/isa_compat.c.
#device		ie0	at isa? disable port 0x300 irq 10 iomem 0xd0000
#device		le0	at isa? disable port 0x300 irq 5 iomem 0xd0000
#device		lnc0	at isa? disable port 0x280 irq 10 drq 0
#device		cs0	at isa? disable port 0x300
#device		sn0	at isa? disable port 0x300 irq 10

# Pseudo devices - the number indicates how many units to allocate.
pseudo-device	loop			# Network loopback
pseudo-device	ether			# Ethernet support
#pseudo-device	sl	1		# Kernel SLIP
#pseudo-device	ppp	1		# Kernel PPP
pseudo-device	tun			# Packet tunnel.
pseudo-device	pty			# Pseudo-ttys (telnet etc)
pseudo-device	md			# Memory "disks"
pseudo-device	gif			# IPv6 and IPv4 tunneling
pseudo-device	faith	1		# IPv6-to-IPv4 relaying (translation)

# The `bpf' pseudo-device enables the Berkeley Packet Filter.
# Be aware of the administrative consequences of enabling this!
pseudo-device	bpf			#Berkeley packet filter

# USB support
#device		uhci			# UHCI PCI->USB interface
#device		ohci			# OHCI PCI->USB interface
#device		usb			# USB Bus (required)
#device		ugen			# Generic
#device		uhid			# "Human Interface Devices"
#device		ukbd			# Keyboard
#device		ulpt			# Printer
#device		umass			# Disks/Mass storage - Requires scbus and da
#device		ums			# Mouse
#device		uscanner		# Scanners
#device		urio			# Diamond Rio MP3 Player
# USB Ethernet, requires mii
#device		aue			# ADMtek USB ethernet
#device		cue			# CATC USB ethernet
#device		kue			# Kawasaki LSI USB ethernet

# FireWire support
#device		firewire		# FireWire bus code
#device		sbp			# SCSI over FireWire (Requires scbus and da)
#device		fwe			# Ethernet over FireWire (non-standard!)

options         QUOTA			#enable disk quotas

options         COMPAT_LINUX		#Linux Emulation tuki
#options         LINPROCFS		#Linux Procfs tuki